2, if the charger can't feel there is water, then how many there are saved. At this time of the charger can be made in the open air, with exposure under the sun or a lamp, a week or so, most of the water is running light. Then you can get cheap things of the old cell phone MP3 try once, can, that's no problem.
3,and pick it up with a hair dryer cold wind blow for a while, and then buried in a day of rice, because rice water imbibition is strong. Take out a day later, or to buy silicon chemical desiccant, further dehumidification. Note 2 days don't recharging or easily charge out of the question, if there are problems, it can only buy a again.
Phone charger off water, dry can be used, but be sure to dry reoccupy, because if charging line with water, would be dangerous to use, if you don't know he do not dry, can hang a period of time and then use the reasons to make discharger is this: the design of the general electric is parallel to the direction and the direction of electric circuit board. That is to say if the shape of the electric equipment is flat, so the inside of the circuit board is flat on the inside, rarely with appliances and vertical shape.
Mastery of the principles, we can use some good positions to fill the charger to dry. Because the charger circuit is simple, the area of circuit is small, can every few hours when drying is reversed direction, in order to speed up the water discharge.
The charger with water if was soaked in use process, the relatively socket will be more dangerous. Especially sometimes can hear strip in edm flashing clicks, then this case never unarmed charger operation, should pull the strip after the plug or turn off the main supply room to operate.
Kim
2019-7-30
Disclaimer: This article comes from individual, KRECO has the right of final interpretation.